Protan EX-A Membrane
Insulate roof floor with polyester reinforced Protan EX-A membrane. The membrane is used for adhered roof system and has fleece laminated on the reverse side.
Protan EX-A membrane is a polyester reinforced PVC membrane which has a polyester fleece laminated on the reverse side. The membrane is to be installed in an exposed adhered roof system in which it is bonded to polyisocyanurate (PIR) insulation.
Thickness:
1.5 mm + polyester fleece
1.8 mm + polyester fleece
Standard widths:
2.0 m
Standard roll lengths:
20 m for thickness 1.5 mm
15 m for thickness 1.8 mm
Colours*:
Light grey F 91
Dark grey F94
Verdigris green F41
Red F12
White/Cool Roof F01
Black FX9
*Prices will vary depending on the choice of colour
FIRE TESTING REQUIREMENTS FOR FITTING EXPOSED ROOFS ON A BUILDING.
ABOUT THE RULES FOR FIRE RATINGS OF ROOF MEMBRANES IN EUROPE:
Airborne fire tests of roof membranes for rating in Europe are carried out according to the test methods prEN*)1187. This is divided into four parts:
- prEN1187 part 1, known as the German fire test
- prEN1187 part 2, known as the Nordic fire test
- prEN1187 part 3, known as the French fire test
- prEN1187 part 4, known as the British fire test
*) prEN, where 'pr' means 'Preliminary', E-European and N-Norm. Alternatively, 'ENV' is also used, where 'V' stands for “Vornorm”.
It is up to the authorities of a country to decide which of the four parts/methods will be accepted. After satisfactory testing, the roof membrane can be classified in accordance with EN13501-5 for the applicable surface it was tested on and receives the classification:
- BROOF(t1) in accordance with EN13501-5 and ENV 1187 part 1,
- BROOF(t2) in accordance with EN13501-5 and ENV 1187 part 2,
- BROOF(t3) in accordance with EN13501-5 and ENV 1187 part 3, or
- BROOF(t4) in accordance with EN13501-5 and ENV 1187 part 4,
Contact Protan for an overview of all relevant fire classifications.
We have solutions for BROOF(t1),BROOF(t2), BROOF(t3) and BROOF(t4) classifications for most relevant surfaces.